 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A VRPC-04C Series * * * * * * * * * Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation Optimized for cost Remote on/off Undervoltage lockout Over current and short circuit protection Industrial temperature range POWER PRODUCTS BP06VRPC-04C RoHS Compliant Description The Bel VRPC-04C series modules are non-isolated, boost DC/DC power converters that operate from a nominal 3.3V source. These converters provide an output voltage of 5V and are packaged in an industry standard single-in-line footprint with 4A maximum output. Standard features include remote on/off, over current and short circuit protection. A version of this converter is also available without remote on/off. These products may be used almost anywhere 5V is required and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications * * * Telecommunications Networking Computers and peripherals Part Number Selection Output Voltage 5.0V Input Voltage 3.3V Max. Output Current 4A Max. Output Power 20W Typical Efficiency 90% Part Number with Remote On/Off VRPC-04C500 Part Number without Remote On/Off VRPC-04C50N (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 1 POWER PRODUCTS BP06VRPC-04C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -55 Typical Max 5 5 +85 +100 Unit V V C C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold 1.5 90 25 120 0.01 2.8 2 Symbol Vin Iin Min 3 Typical Max 4 8 400 150 50 200 0.02 2.9 2.7 Units V A mA mA mArms mApk A2s V V Note: Input capacitance 270F/10V, ESR = 0.03 max at 100kHz @ 25 C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A POWER PRODUCTS BP06VRPC-04C Output Specifications Parameter Output Voltage Set Point1 Load Regulation Line Regulation Regulation Over Temperature 0 - 70 C Total Output Voltage Regulation Output Ripple and Noise2 Output Ripple and Noise2 Output Current Range Output DC Current Limit Short Circuit Surge Turn on Time Overshoot at Turn On Output Capacitance Transient Response3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load Settling Time Ts Ts 125 200 125 200 250 500 250 500 mV s mV s Cout 0 Iout Ioutlim Ioutsurge Ton 0 4.8 6 0.12 50 0 4.75 40 8 Symbol Vout Min 4.85 Typical 5 10 5 15 Max 5.15 25 15 45 Units V mV mV mV 5.25 100 25 4 7 0.2 150 3 1600 mV mVp-p mVrms A A A2s ms % F Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25 C. 2. 0 - 20MHz BW, 0.1F ceramic cap on output. 3. di/dt = 0.5A/uS, Vin = 3.3VDC, Ta = 25 C, and with a 470F aluminum cap on output. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 3 POWER PRODUCTS BP06VRPC-04C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A General Specifications Parameter Efficiency1 Switching Frequency Weight Symbol Fsw Min 87 180 Typical 90 200 9.3 220 Max Units % kHz g 1. Vin=3.3V, full load and Ta=25 C. Control Specifications Parameter Remote On/Off Signal Low (Unit Off) Signal High (Unit On) Symbol Vouten -0.3 2.8 0.3 5 Min Typical Max Units V V V Efficiency Data 95.0% 90.0% 85.0% 80.0% 75.0% 70.0% 0.0 1.0 2.0 OUTPUT CURRENT 3.0 4.0 3.0V 3.3V 4.0V (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 4 EFFICIENCY NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A POWER PRODUCTS BP06VRPC-04C Ripple and Noise Ripple and noise at full load and 3.3Vdc input and Ta=25 C Transient Response Transient response: di/dt = 0.5A/S, external load capacitance Co = 470F (electrolytic) 50% to 100% load transients at 3.3V input and Ta=25 C 100% to 50% load transients at 3.3V input and Ta=25 C (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 5 POWER PRODUCTS BP06VRPC-04C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A Thermal Considerations (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A Mechanical 0.10 [2.54] 2.50 [63.50] 0.36 [9.15] max 0.063 [1.60] 0.025 [0.64] 0.128 [3.25] 0.15 [3.81] POWER PRODUCTS BP06VRPC-04C 0.10 [2.54] 1.90 [48.26] 0.28 [7.12] 0.13 [3.30] 0.55 [13.98] Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. Pin 1 2 3 4 5 6 7 8 9* 10 11 Function +Vo +Vo No Pin -Vo -Vo -Vin -Vin +Vin No Pin +Vin +Vin *Pin 9 used for remote on/off. RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 7 |
Price & Availability of VRPC-04C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |